4 1/2 hours, three pictures. Doesn't seem like we accomplished much, but we sure were busy.

	Spent a good while drilling out the midbrace's cage nut. I was not able to remove the bolt, and ran into some issues with the tap and die set so I wasn't able to rethread it yet.
	I was able to remove the bolts from the two front body mount cage nuts, and rewelded the cages.
	The cage nut for the rear fender bolt has also been removed, the broken bolt removed, retapped, and the cage rewelded in place. Tomorrow I'll start on repairing the inner rocker.