Random rust repair today.

	Pic of the large rust hole in the dash. This pic is from the 4 Oct update
	Here it is, before the welds were ground down.
	And after.
	Then moved on to the spots on the door. Here we have it after I cut them out but before adding any metal.
	Top spot filled, on to the second one.
	All three, filled with real metal.
	One of the bolts to attach the driver's side fender was still attached (the fender had rusted away from it). Predictably, it sheared off.
	Cut the side out of the cowl to get at the cage for this nut. Vacuumed a huge amount of leaves and dirt and stuff out of this side of the cowl.
	Got the bolt partway drilled out before it came time to call it a day. Tomorrow? Finish the nut.