27 May 2010
Chevelle Gas Tank

Cut the plate for the motor mount.  Can't get to my drill bits right now to make the holes. 
Took the old sender out of the Chevelle's tank.  Lots of rust, the sock is crusty and stiff.  The lock ring was not easy to get off.
Cleaned out the inside of the tank with a pressure washer.  Painted the outside with a "Cold Zinc Galvanizing" coating. 

This tank has obviously seen some wear.
Put the new sender in the tank.  Getting the lock ring on was... not easy.

Go back to the previous day (25 May 10)